The GM901 gas analyzer is available as a cross-duct or probe type. As a result, it is suited to a broad range of applications – even for difficult measuring tasks such as high dust loads, overpressure, critical flow profiles or high measuring gas concentrations. For more inbation on the GM901, click here.

GME700
High reliability and precision are the distinguishing features of the GME700 laser gas analyzer. Based on the principle of TDLS (Tunable Diode Laser Spectroscopy) and by using specific light absorption, the GME700 is able to measure several gas components, such as NH3, HF, O2 or HCl. For more inbation on the GME700, click here.

GMS800
The GMS800 is an innovative product family of extractive analyzers which can measure more than 60 different gas compounds. The GMS800 is characterized by its modular design: 7 analyzing modules, one gas module, I/O modules and an operating unit. For more inbation on the GMS800, click here.
 MEASUREMENT TECHNOLOGY THAT'S ON YOUR SIDE
NEW MASTER PLAN FOR MERCURY EMISSIONS FROM LARGE COMBUSTION PLANTS
 
The impending updates to the BREF documents have indicated that mercury emissions from large combustion plants will soon have to be reduced dramatically. However, a reliable measurement solution is already ready and waiting with a certified measuring range from 0 to 10 μg/m3 of mercury. The MERCEM300Z by SICK. Continue reading →

GREENHOUSE GAS MEASUREMENT
MEASURING RATHER THAN CALCULATING: EFFICIENT GREENHOUSE GAS MEASUREMENT DIRECTLY IN THE STACK
 
Emissions trading requires facilities that generate greenhouse gases to take their own measurements and draw up reports concerning the volume of emissions that they produce. The EU directive that took effect at the beginning of 2013 saw the introduction of more bent requirements when it comes to the accuracy of these measurements. The measurement uncertainty for high quantities of emissions must be below 2.5%. Vantaan Energia, an energy supplier based in Finland, has found a solution to this challenge thanks to the GHG-Control greenhouse gas measuring system by SICK. Continue reading →

USING CO2 “GREEN” PRODUCTS
CUTTING EMISSIONS: THERE IS ANOTHER WAY
 
The energy revolution has also brought to light the fact that carbon dioxide is only a bad thing when it is released into the air. If, however, CO2 is captured and stored, it could make a significant contribution to reducing CO2 and generating “green” products. Carbon dioxide is the key ingredient in the power-to-gas concept, for example. This technology involves storing renewable energy in the b of synthetic methane gas to provide a combined solution that both reduces CO2 and allows problematic green power surpluses to be stored. What’s more, CO2 bs part of the process for producing plastics which are free of petroleum. Continue reading →

GAS ANALYZERS
TRANSIC100LP NOW MEASURES OXYGEN ATEX-COMPLIANT
 TRANSIC100LP
Measuring the oxygen in the process can be quite simple. The TRANSIC100LP from SICK is the rugged transmitter that uses Tunable Diode Laser Spectroscopy (TDLS) to measure O2 reliably. A technology more common in the world of high-tech analysis, is now being used in a field instrument: at an attractive price, easy installation, a long life, low maintenance and now suitable for use in potentially explosive atmospheres. Continue reading →

GAS ANALYZERS | EXPLOSION PROTECTION
EXPLOSION PROTECTION: FID GAS WARNING DEVICE FROM SICK IS THE ONLY ONE WHICH MEETS THE LATEST STANDARD
 Gaswarnger?t EuroFID3010
Solvents are used e.g. in paint shops and coating lines and being disposed in exhaust air decontamination systems. This process creates gas mixtures, the concentration of which must be analyzed to prevent them from becoming dangerous. The EuroFID3010 total hydrocarbon gas analyzer measures within seconds the low explosion level (LEL) of solvents and air/gas mixtures and is the only FID gas warning device which takes measurements in accordance with 
MCS300P
The MCS300P is an extractive process photometer for measurement of gaseous or liquid media. It measures IR and VIS active components with variable measuring ranges from very low (ppm) to high (vol%) concentrations. For more inbation on the GMS800, click here.

MERCEM300Z
The MERCEM300Z mercury measuring system monitors Hg emissions in flue gases with high reliability within the smallest measuring ranges. Due to its rugged housing, MERCEM300Z is suitable for use in harsh industrial environments. For more inbation on the MERCEM300Z, click here.

S700
The S700 modular system offers a configuration specific to the application. The S700 enclosures can be equipped with up to 3 analyzer modules for compact and cost-effective solutions. For more inbation on the S700, click here.
 
SIDOR
The SIDOR is a gas analyzer for measurement of up to 2 infrared components. Additionally oxygen can be measured by integration of an electrochemical or bagnetic measuring cell. For more inbation on the SIDOR, click here.

TRANSIC100LP
Measuring the oxygen in the process can be quite simple. The TRANSIC100LP from SICK is the rugged transmitter that uses Tunable Diode Laser Spectroscopy (TDLS) to measure O2 reliably. For more inbation on the TRANSIC100LP, click here.
MEASUREMENT TECHNOLOGY THAT'S ON YOUR SIDE
NEW MASTER PLAN FOR MERCURY EMISSIONS FROM LARGE COMBUSTION PLANTS