產品詳情
DETER歐境氣體增壓缸泵浦PWQ100002
DPW100系列 / DPW100 Series
《產品介紹 note》：
|
產品編碼 |
倍比 Ratio |
輸出壓力 Outlet Pressure(Ph*) |
吐出量(往返一次) Fluid volume for cycle (L/cycle) |
耗氣量(往返一次) Consumption for cycle (L/cycle) |
|
PWQ100002 |
2:1 |
1Pd**+Ps*** |
8.8 |
(1.602xPd+1.655)/1.033 |
|
DPW100004 |
4:1 |
3Pd+Ps |
2.24 |
|
|
DPW100006 |
6:1 |
5Pd+Ps |
1.43 |
|
|
DPW100011 |
11:1 |
10Pd+Ps |
0.8 |
* PH= Outlet Pressure / ** PD= Driven Pressure / *** PS = Supply Pressure / Pressure Ratio=PH/PD / signal pressure≥ Pd pressure
附註：設定驅動壓(PD) = 6 kg/cm2, 被壓縮壓(PS) = 6 kg/cm2壓力時,則『每分鐘PH輸出量』及『驅動壓(PD)往返一次耗氣量』所得到的數值如表格內所載明.
Note :If Driven Pressure (PD) is 6 kg/cm2, Supply Pressure (PS) is 6 kg/cm2 pressure, the 『Per minute PH of output』and 『Driven pressure consumption by cycle』the resulting values in the b described.
舉例:當氣體增壓泵浦規格為DPW100004,在PD=6 kg/cm2且 PS=6 kg/cm2的壓力時,則『每分鐘PH輸出量』所得之計算數值為:126 l/min;另外『驅動壓(PD)往返一次耗氣量』所得之計算數值為10.8L
For example: When High Pressure Gas Booster specifications for DPW100004, in the PD is 6 kg/cm2 and PS is 6 kg/cm2 pressure, the 『Per minute PH of output』of calculated values are: 126 l/min; Additionally 『Driven pressure consumption by cycle』calculated values to 10.8L.
