產品詳情
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All b for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics.
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All b for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics.
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All b for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics
韓國高麗KNF-50焊條
類別
品名
JIS型號
焊道金屬化學成分(%)
主要用途
C
Si
Mn
Cr
Mo
焊條
KM-100
DF2A-250-R
0.11
0.42
0.98
金屬對金屬的磨耗用，適合于齒輪和車輪的堆焊
KM-100C
DF2A-350-R
0.19
0.44
0.74
2.6
金屬對金屬的磨耗用，適合于齒輪和軸的堆焊
KM-300R
DF2A-300-R
0.20
0.40
0.46
2.7
金屬對金屬的磨耗用，適合于軸、滾柱和類似物的堆焊
KM-250
DF2A-250-B
0.11
0.52
1.72
金屬對金屬的磨耗用，適合于如軸、齒輪和車輪等已磨耗的部件的堆焊和維修
KM-350
DF2B-350-B
0.36
0.65
0.74
2.0
金屬對金屬的磨耗用，適合于滾柱、軸、鏈輪等的堆焊
KM-500
DF2B-450-B
0.38
0.84
1.56
2.5
適合于滾柱、鏈輪、螺旋輪送機和堆土機刮板等的堆焊
KM-700
DF2B-700-B
0.48
0.80
1.45
4.4
劃痕用，適合于攪拌機、切割刀、挖泥機等的堆焊
KM-800
DF3C-700-B
0.68
0.50
1.23
5.7
劃痕用，適合于泵鑄造、葉輪和鏟斗等的堆焊
KM-900
DFMA-250-B
0.52
0.30
12.1
耐震和耐磨用，適合于碎石機、高錳鋼軌道、鏟頭刀口和挖土機凸輪的堆焊
KM-11Cr
DF4B-500-B
0.40
1.28
0.4611.2
1.4
高溫時的耐磨和耐蝕用，適合于切削刀具，剪切葉片和類似物的堆焊
KM-13CrM
0.30
0.48
12.4
11.8
1.5
高溫時的耐磨用，適合于錠鉗、拉刀和類似物等的堆焊
KQD-600
0.42
0.57
0.40
9.7
1.3
適合于壓型機、鍛型鋼模、工具用鋼鐵和經由淬火硬化的部件的堆焊
KOSPEL-800R
0.38
0.42
0.32
5.5
2.5
適合于碎石機、螺旋輸送機、履帶、挖泥機刀口和其他多角型邊的堆焊
KM-1000
DFWA-700-S
2.98
0.60
1.88
用于磨耗嚴重的，適合于切削刀、推土機凸輪、混凝土攪拌機和鼓風機等的堆焊
