產品詳情
可拆卸式保溫套（保溫被、衣）是目前高檔的管道、設備保溫材料，廣泛應用于石油 化工、化學工程、電力、紡絲、冶金、建筑、船舶、輪胎、窯爐、造紙、制藥等領域的熱力設備和各種管道、暖通空調及制冷裝置。它適用于各種管道、設備絕熱保溫， 是理想的管道設備保溫材料！如管道、彎頭、法蘭、閥門、視鏡、三通、流量計、液 位計、壓力表、化學反應器、實驗室儀器、設備、火電核電汽輪機組、封頭、泵、鋼
鐵廠等高溫環境下的儀表箱、熱交換器、壓縮機、柴油機、燃氣機、發動機、空氣機 及其它異型件等。
At present, it is a high grade pipeline heat preserving material, and widely used in various pipeline, warm ventilation air-conditioning equip of petroleum, chemical, filature, bllurgy, electricity and is an ideal pipeline heat preserving material. For example, pipeline, elbow, flange, valve, tie-in of pipeline, chemical reactor, equipment, air machine of fire power or nub power, instrument box and exchange equipment used in high temperature environment of steel factory and other profiled part.
產品主要類別JSAVE Product Category
我公司自主開發的五大類產品：
保內溫型：保“被保溫體的內部溫度”，使內部熱能不和外界產生熱交換（對流、 輻射、傳遞）。保證生產的必備溫度，使內部熱量得到最大限度的利用，達到節 能目的。
防外熱輻射型：防止強烈的外熱輻射，使外界熱量不能傳導到被保溫體內部，影 響被保溫體的正常工作溫度，甚至損害設備、零部件、儀表等。
防凍型：防止外部低溫影響被保溫體內部的工作溫度。主要用于管道、設備、儀 表、儀器的防凍及工藝穩定，所用材料及保溫衣形式根據現場要求定制。
低溫保冷型：防止外部高溫傳遞到低溫保冷區。
伴熱保溫型（加熱保溫型）：為了滿足生產工藝條件，或防止低溫防凍，需要對 設備、管道等主動提供熱源加熱，同時需要外加保溫衣（套）保溫，使之保持一 定的溫度。以滿足工藝、設備運行的溫度需要。
Five main products of our company:
Inner temperature-hold type: keep the inner temperature of the protected products, to stop heat exchange of the inner and outside energy (convection,
radiation, and transfer). Keep the necessary temperature for production and maximize the energy utilization by saving energy.
Resisting outside-radiation type: resist strong outside heat radiation to keep the outer heat outside. Minimize harm to the equipment, part, and instruments.
Anti-freezing type: resisting outside low temperature impact the working temperature of protected equipments. This type is mainly used to protect pipeline, equipment, and instrument. The material used to make this covering is decided by the locale request.
Keeping low temperature type: keep away the outside heat transfer to the inside which may impact the low-temperature protected equipments.
Calefb type: to satisfy the request of production, or resist freezing, the equipment and pipeline maybe need to be het up, meanwhile it needs to have covering to keep the temperature.
